mirror of
https://git.straybits.ca/straybits/docker-samples.git
synced 2024-11-07 18:22:26 +00:00
Compare commits
No commits in common. "34095f1dd213cb69fd17e6037dcb0393815c4115" and "f0f9f608cc362e234f7570058da739143d9296cb" have entirely different histories.
34095f1dd2
...
f0f9f608cc
31 changed files with 1 additions and 1042 deletions
|
|
@ -4,6 +4,6 @@ This repository is a collection of Docker Compose examples for various self-host
|
|||
|
||||
To make services easier to manage (backup, restore, move to a different host, etc.), they typically use bind-mounts to store data in a subdirectory (typically `./data`) alongside the `docker-compose.yml` and `.env` files, rather than Docker Volumes.
|
||||
|
||||
Similarly, many examples here rely on Cloudflare Tunnels for publicly exposing services, and Tailscale for internal services. This allows them to be run within homelabs without poking holes in firewalls, or needing to pay for a VPS.
|
||||
Similarly, many examples here rely on Cloudflare Tunnels for publicly exposing services, and Tailscale for internal services.
|
||||
|
||||
In most cases, minimal changes should be required to the `docker-compose.yml` file, while the bulk of the changes will be to the `.env` file.
|
||||
|
|
|
|||
|
|
@ -1,41 +0,0 @@
|
|||
# DIY Tunnel
|
||||
|
||||
I **love** Cloudflare Tunnels and routinely use them to expose my self-hosted services to the Internet. However, there are a couple of limitations that make them less than ideal for some use-cases.
|
||||
|
||||
1. They work best with HTTP/HTTPS services. Other services like SSH / rando-TCP-service require the *clients* to run `cloudflared`. This prevents running public-facing non-HTTP services via. Cloudflare Tunnels.
|
||||
2. Cloudflare is the *man-in-the-middle*. They manage the TLS certificates and, were they evil, they could inspect traffic.
|
||||
|
||||
This folder has some sample wireguard configuration to allow a cheap cloud-VPS to forward traffic through a wireguard tunnel to a private server.
|
||||
|
||||
* The VPS does not own/manage TLS certificates or any data.
|
||||
* It supports any TCP services
|
||||
* The connection is made from the private server to the public VPS, so only the VPS requires a static IP. The private server can hide behind a VPN and move networks with impunity.
|
||||
* Through some network trickery, packets are forwarded from the VPS to the private server. The implication is that the private server sees the actual source IPs for the traffic which allows things like fail2ban to work appropriately.
|
||||
|
||||
Requirements:
|
||||
1. One public facing machine (like a VPS) with a static IPv4 address
|
||||
2. One private machine running your services
|
||||
3. Wireguard installed on each (`apt install wireguard` for you Debian/Ubuntu folks)
|
||||
|
||||
Steps:
|
||||
1. Generate keys for both the public and private server.
|
||||
1. `wg genkey | tee privatekey | wg pubkey > publickey`
|
||||
2. Copy `private/wg0.conf` to `/etc/wireguard/wg0.conf` on your private server.
|
||||
* Update the ports `80,443` to be whatever ports you want to pass through.
|
||||
* Add the private key for the public server, and the public key for the private server.
|
||||
3. Copy `public/???/wg0.conf` to `/etc/wireguard/wg0.conf` on your public server.
|
||||
* Update the ports `80,443` to be whatever ports you want to pass through.
|
||||
* Add the private key for the private server, and the public key for the public server.
|
||||
* Update the public IP for the public server (replace all 999.999.999.999) with your VPS IP
|
||||
4. Start wireguard on each machine: `wg-quick wg0 up`
|
||||
5. Enable wireguard on boot on each machine: `sudo systemctl enable wg-quick@wg0`
|
||||
|
||||
## Testing:
|
||||
1. From public server, can ping private IP `ping 10.0.0.2`
|
||||
2. From private server, can ping public IP `ping 10.0.0.1`
|
||||
3. Run a webserver on the private server...
|
||||
1. From public server: `curl http://10.0.0.2` should work
|
||||
2. From workstation: `curl http://publicIP` should work
|
||||
3. From the private server: `curl http://publicIP` should also work
|
||||
|
||||
That's about it.
|
||||
|
|
@ -1 +0,0 @@
|
|||
`wg0.conf` should be deployed to `/etc/wireguard/wg0.conf` on the public facing (VPS) server.
|
||||
|
|
@ -1,15 +0,0 @@
|
|||
[Interface]
|
||||
Address = 10.0.0.1/24 # Private IP for the VPS in the VPN network
|
||||
ListenPort = 51820 # Default WireGuard port
|
||||
PrivateKey = ###PRIVATE KEY FOR PUBLIC SERVER####
|
||||
|
||||
# packet forwarding
|
||||
PreUp = sysctl -w net.ipv4.ip_forward=1
|
||||
|
||||
# port forwarding (HTTP, HTTPS) - update port list as required
|
||||
PreUp = iptables -t nat -A PREROUTING -i eth0 -p tcp -m multiport --dports 80,443 -j DNAT --to-destination 10.0.0.2
|
||||
PostDown = iptables -t nat -D PREROUTING -i eth0 -p tcp -m multiport --dports 80,443 -j DNAT --to-destination 10.0.0.2
|
||||
|
||||
[Peer]
|
||||
PublicKey = ###PUBLIC KEY FOR PRIVATE SERVER####
|
||||
AllowedIPs = 10.0.0.2/32 # IP of the home server in VPN
|
||||
|
|
@ -1 +0,0 @@
|
|||
Another nice option is instead of installing wireguard on the bare machine, we can fire it up within our existing `docker-compose.yml` and easily expose services from a set of docker containers.
|
||||
|
|
@ -1,27 +0,0 @@
|
|||
services:
|
||||
|
||||
wireguard:
|
||||
image: lscr.io/linuxserver/wireguard:latest
|
||||
hostname: THEPRIVATESERVER
|
||||
cap_add:
|
||||
- NET_ADMIN
|
||||
environment:
|
||||
- TZ=America/Edmonton
|
||||
volumes:
|
||||
- ./wg0.conf:/config/wg_confs/wg0.conf
|
||||
restart: always
|
||||
sysctls:
|
||||
- net.ipv4.ip_forward=1
|
||||
|
||||
caddy:
|
||||
image: caddy:latest
|
||||
restart: always
|
||||
# this is the special sauce. This attaches this container to the
|
||||
# network context of the wireguard container. Essentially this means
|
||||
# that Caddy is listening on 10.0.0.2 now.
|
||||
# If you have other containers exposing additional ports, do the same to them.
|
||||
network_mode: service:wireguard
|
||||
volumes:
|
||||
- ./Caddyfile:/etc/caddy/Caddyfile # Mount Caddyfile for configuration
|
||||
- ./webroot:/srv/www # Mount local www directory to container
|
||||
- ./data/caddy:/data/caddy # Persistent storage for certificates
|
||||
|
|
@ -1,13 +0,0 @@
|
|||
[Interface]
|
||||
Address = 10.0.0.2/24 # Private IP for the home server in the VPN network
|
||||
PrivateKey = #### PRIVATE KEY OF PRIVATE SERVER ####
|
||||
Table = 123
|
||||
|
||||
PreUp = ip rule add from 10.0.0.2 table 123 priority 1
|
||||
PostDown = ip rule del from 10.0.0.2 table 123 priority 1
|
||||
|
||||
[Peer]
|
||||
PublicKey = #### PUBLIC KEY OF PUBLIC SERVER ####
|
||||
AllowedIPs = 0.0.0.0/0
|
||||
Endpoint = 999.999.999.999:51820
|
||||
PersistentKeepalive = 25
|
||||
|
|
@ -1,3 +0,0 @@
|
|||
Copy `wg0.conf` to `/etc/wireguard/wg0.config`
|
||||
|
||||
This example is for wireguard running on the private server and forwarding traffic to local services AND docker services.
|
||||
|
|
@ -1,46 +0,0 @@
|
|||
[Interface]
|
||||
Address = 10.0.0.2/24 # Private IP for the home server in the VPN network
|
||||
PrivateKey = #### PRIVATE KEY OF PRIVATE SERVER #####
|
||||
Table = 123
|
||||
|
||||
# Enable IP forwarding
|
||||
PreUp = sysctl -w net.ipv4.ip_forward=1
|
||||
|
||||
# loose reverse path forwarding validation
|
||||
PostUp = sysctl -w net.ipv4.conf.wg0.rp_filter=2
|
||||
|
||||
# Mark new connections coming in through wg0
|
||||
PreUp = iptables -t mangle -A PREROUTING -i wg0 -m state --state NEW -j CONNMARK --set-mark 1
|
||||
PostDown = iptables -t mangle -D PREROUTING -i wg0 -m state --state NEW -j CONNMARK --set-mark 1
|
||||
|
||||
# Mark return packets to go out through WireGuard via policy routing
|
||||
PreUp = iptables -t mangle -A PREROUTING ! -i wg0 -m connmark --mark 1 -j MARK --set-mark 1
|
||||
PostDown = iptables -t mangle -D PREROUTING ! -i wg0 -m connmark --mark 1 -j MARK --set-mark 1
|
||||
|
||||
# Push marked connections back through wg0
|
||||
PreUp = ip rule add fwmark 1 table 123 priority 456
|
||||
PostDown = ip rule del fwmark 1 table 123 priority 456
|
||||
|
||||
# Route traffic to public IP to self to avoid it hitting the network
|
||||
PreUp = iptables -t nat -A OUTPUT -d 999.999.999.999 -p tcp -m multiport --dports 80,443 -j DNAT --to-destination 127.0.0.1
|
||||
PostDown = iptables -t nat -D OUTPUT -d 999.999.999.999 -p tcp -m multiport --dports 80,443 -j DNAT --to-destination 127.0.0.1
|
||||
|
||||
# ==== Firewall ===============================
|
||||
|
||||
# Allow our expected traffic
|
||||
PreUp = iptables -A INPUT -i wg0 -p tcp -m multiport --dports 80,443 -j ACCEPT
|
||||
PostDown = iptables -D INPUT -i wg0 -p tcp -m multiport --dports 80,443 -j ACCEPT
|
||||
|
||||
# And pings
|
||||
PreUp = iptables -A INPUT -i wg0 -p icmp --icmp-type echo-request -j ACCEPT
|
||||
PostDown = iptables -D INPUT -i wg0 -p icmp --icmp-type echo-request -j ACCEPT
|
||||
|
||||
# Block the rest
|
||||
PreUp = iptables -A INPUT -i wg0 -j DROP
|
||||
PostDown = iptables -D INPUT -i wg0 -j DROP
|
||||
|
||||
[Peer]
|
||||
PublicKey = #### PUBLIC KEY OF PUBLIC SERVER #####
|
||||
AllowedIPs = 0.0.0.0/0
|
||||
Endpoint = 999.999.999.999:51820
|
||||
PersistentKeepalive = 25
|
||||
|
|
@ -1,3 +0,0 @@
|
|||
Copy `wg0.conf` to `/etc/wireguard/wg0.config`
|
||||
|
||||
This example works well for forwarding traffic to services running directly on the private server. If your services are running in Docker things get much more complicated because of how Docker handle networking. For that, see the `/public/docker-on-host` example.
|
||||
|
|
@ -1,35 +0,0 @@
|
|||
[Interface]
|
||||
Address = 10.0.0.2/24 # Private IP for the home server in the VPN network
|
||||
PrivateKey = #### PRIVATE KEY OF PRIVATE SERVER #####
|
||||
Table = 123
|
||||
|
||||
# Enable IP forwarding
|
||||
PreUp = sysctl -w net.ipv4.ip_forward=1
|
||||
|
||||
# Return traffic through wireguard
|
||||
PreUp = ip rule add from 10.0.0.2 table 123 priority 1
|
||||
PostDown = ip rule del from 10.0.0.2 table 123 priority 1
|
||||
|
||||
# Route traffic to public IP to self to avoid it hitting the network
|
||||
PreUp = iptables -t nat -A OUTPUT -d 999.999.999.999 -p tcp -m multiport --dports 80,443 -j DNAT --to-destination 127.0.0.1
|
||||
PostDown = iptables -t nat -D OUTPUT -d 999.999.999.999 -p tcp -m multiport --dports 80,443 -j DNAT --to-destination 127.0.0.1
|
||||
|
||||
# ==== Firewall ===============================
|
||||
|
||||
# Allow our expected traffic
|
||||
PreUp = iptables -A INPUT -i wg0 -p tcp -m multiport --dports 80,443 -j ACCEPT
|
||||
PostDown = iptables -D INPUT -i wg0 -p tcp -m multiport --dports 80,443 -j ACCEPT
|
||||
|
||||
# And pings
|
||||
PreUp = iptables -A INPUT -i wg0 -p icmp --icmp-type echo-request -j ACCEPT
|
||||
PostDown = iptables -D INPUT -i wg0 -p icmp --icmp-type echo-request -j ACCEPT
|
||||
|
||||
# Block the rest
|
||||
PreUp = iptables -A INPUT -i wg0 -j DROP
|
||||
PostDown = iptables -D INPUT -i wg0 -j DROP
|
||||
|
||||
[Peer]
|
||||
PublicKey = #### PUBLIC KEY OF PUBLIC SERVER #####
|
||||
AllowedIPs = 0.0.0.0/0
|
||||
Endpoint = 999.999.999.999:51820
|
||||
PersistentKeepalive = 25
|
||||
|
|
@ -1,38 +0,0 @@
|
|||
FORGEJO_TAG=8
|
||||
FORGEJO_RUNNER_TAG=4.0.1
|
||||
|
||||
# Tailscale authorization key
|
||||
TS_AUTHKEY=tskey-auth-
|
||||
|
||||
# Tailscale tailnet node name
|
||||
TAILNET_NAME=git
|
||||
TAILNET_SUFFIX=XXXXXX.ts.net
|
||||
|
||||
# Instance Settings
|
||||
APP_NAME="My Git Server"
|
||||
FORGEJO_HOSTNAME=${TAILNET_NAME}.${TAILNET_SUFFIX}
|
||||
DISABLE_REGISTRATION=true
|
||||
|
||||
# Database
|
||||
FORGEJO_DB_PASSWORD= ##REQUIRED##
|
||||
|
||||
# Mail
|
||||
MAIL_ENABLED=true
|
||||
MAIL_FROM='"Git Server" <noreply@mg.yourdomain.com>'
|
||||
MAIL_SMTP_USER=forgejo@mg.yourdomain.com
|
||||
MAIL_SMTP_PASSWD= ##REQUIRED##
|
||||
MAIL_SMTP_PROTOCOL=smtps
|
||||
MAIL_SMTP_ADDR=smtp.mailgun.org
|
||||
MAIL_SMTP_PORT=465
|
||||
|
||||
# Initial user
|
||||
ROOT_USER=admin
|
||||
ROOT_EMAIL=admin@yourdomain.com
|
||||
ROOT_PASSWORD= ##REQUIRED##
|
||||
|
||||
# Token for runner (generate with `openssl rand -hex 20`)
|
||||
SHARED_SECRET= ##REQUIRED##
|
||||
|
||||
# Runner name / labels
|
||||
RUNNER_NAME=runner
|
||||
RUNNER_LABELS='[\"docker:docker://code.forgejo.org/oci/node:20-bookworm\", \"ubuntu-22.04:docker://catthehacker/ubuntu:act-22.04\"]'
|
||||
|
|
@ -1,19 +0,0 @@
|
|||
# Forgejo via. Tailscale
|
||||
|
||||
This example is a quick start to running an instance of the excellent Forgejo git server under Docker.
|
||||
|
||||
* private exposed on Tailscale Tailnet
|
||||
* Pre-configured Github Action-style Runners
|
||||
* Mail delivery (assuming Mailgun, but adjustable to any SMTP server)
|
||||
* Pre-configured (no installation wizard) including admin account
|
||||
|
||||
## Steps:
|
||||
|
||||
0. Get an Auth Key from your tailscale account
|
||||
1. Copy `docker-compose.yml` and `.env` to a new folder
|
||||
2. Update variables in `.env` making sure to generate random secrets for the various secrets marked with `##REQUIRED##`
|
||||
5. `docker compose up -d`
|
||||
6. Wait...
|
||||
7. Wait a bit more
|
||||
8. Visit `https://git.your-name.ts.net` in your browser and login with the admin credentials in your `.env` file.
|
||||
9. Verify settings. (i.e. do you want to disable user signups, etc.)
|
||||
|
|
@ -1,132 +0,0 @@
|
|||
services:
|
||||
|
||||
tailscale:
|
||||
hostname: ${TAILNET_NAME}
|
||||
image: tailscale/tailscale
|
||||
volumes:
|
||||
- ./data/tailscale:/var/lib/tailscale
|
||||
- ./ts-serve.json:/config/ts-serve.json:ro
|
||||
- /dev/net/tun:/dev/net/tun
|
||||
cap_add:
|
||||
- net_admin
|
||||
- sys_module
|
||||
environment:
|
||||
TS_AUTHKEY: ${TS_AUTHKEY}
|
||||
TS_SERVE_CONFIG: /config/ts-serve.json
|
||||
TS_AUTH_ONCE: true
|
||||
TS_STATE_DIR: /var/lib/tailscale
|
||||
TS_HOST: ${TAILNET_NAME}
|
||||
restart: unless-stopped
|
||||
|
||||
server:
|
||||
image: codeberg.org/forgejo/forgejo:${FORGEJO_TAG}
|
||||
command: >-
|
||||
bash -c '
|
||||
/bin/s6-svscan /etc/s6 &
|
||||
sleep 10 ;
|
||||
su -c "forgejo forgejo-cli actions register --secret ${SHARED_SECRET}" git ;
|
||||
su -c "forgejo admin user create --admin --username ${ROOT_USER} --password ${ROOT_PASSWORD} --email ${ROOT_EMAIL}" git ;
|
||||
sleep infinity
|
||||
'
|
||||
environment:
|
||||
# https://forgejo.org/docs/latest/admin/config-cheat-sheet/
|
||||
- RUN_MODE=prod
|
||||
- USER_UID=1000
|
||||
- USER_GID=1000
|
||||
- APP_NAME=${APP_NAME}
|
||||
- FORGEJO__server__ROOT_URL=https://${FORGEJO_HOSTNAME}
|
||||
# Prevent the installation wizard from running
|
||||
- FORGEJO__security__INSTALL_LOCK=true
|
||||
# Do we allow new signups?
|
||||
- FORGEJO__service__DISABLE_REGISTRATION=${DISABLE_REGISTRATION}
|
||||
# DB Setup
|
||||
- FORGEJO__database__DB_TYPE=postgres
|
||||
- FORGEJO__database__HOST=db:5432
|
||||
- FORGEJO__database__NAME=gitea
|
||||
- FORGEJO__database__USER=gitea
|
||||
- FORGEJO__database__PASSWD=${FORGEJO_DB_PASSWORD}
|
||||
# Mail Setup
|
||||
- FORGEJO__mailer__ENABLED=${MAIL_ENABLED}
|
||||
- FORGEJO__mailer__FROM=${MAIL_FROM}
|
||||
- FORGEJO__mailer__PROTOCOL=${MAIL_SMTP_PROTOCOL}
|
||||
- FORGEJO__mailer__SMTP_ADDR=${MAIL_SMTP_ADDR}
|
||||
- FORGEJO__mailer__SMTP_PORT=${MAIL_SMTP_PORT}
|
||||
- FORGEJO__mailer__USER=${MAIL_SMTP_USER}
|
||||
- FORGEJO__mailer__PASSWD=${MAIL_SMTP_PASSWD}
|
||||
# Git rid of the splash screen and just show a project listing
|
||||
# on the homepage
|
||||
- FORGEJO__server__LANDING_PAGE=explore
|
||||
restart: always
|
||||
volumes:
|
||||
- ./data/data:/data
|
||||
- /etc/timezone:/etc/timezone:ro
|
||||
- /etc/localtime:/etc/localtime:ro
|
||||
depends_on:
|
||||
- db
|
||||
|
||||
db:
|
||||
image: postgres:13
|
||||
restart: always
|
||||
environment:
|
||||
- POSTGRES_USER=gitea
|
||||
- POSTGRES_PASSWORD=${FORGEJO_DB_PASSWORD}
|
||||
- POSTGRES_DB=gitea
|
||||
volumes:
|
||||
- ./data/postgres:/var/lib/postgresql/data
|
||||
|
||||
# Runner configuration is fairly complex and uses Docker-in-Docker
|
||||
# Pulled from this example:
|
||||
# https://code.forgejo.org/forgejo/runner/src/branch/main/examples/docker-compose/compose-forgejo-and-runner.yml
|
||||
|
||||
runner-register:
|
||||
image: code.forgejo.org/forgejo/runner:${FORGEJO_RUNNER_TAG}
|
||||
links:
|
||||
- docker-in-docker
|
||||
- server
|
||||
environment:
|
||||
DOCKER_HOST: tcp://docker-in-docker:2376
|
||||
volumes:
|
||||
- ./data/runner-data:/data
|
||||
user: 0:0
|
||||
command: >-
|
||||
bash -ec '
|
||||
while : ; do
|
||||
forgejo-runner create-runner-file --connect --instance http://server:3000 --name ${RUNNER_NAME} --secret ${SHARED_SECRET} && break ;
|
||||
sleep 1 ;
|
||||
done ;
|
||||
sed -i -e "s|\"labels\": null|\"labels\": ${RUNNER_LABELS}|" .runner ;
|
||||
forgejo-runner generate-config > config.yml ;
|
||||
sed -i -e "s|network: .*|network: host|" config.yml ;
|
||||
sed -i -e "s|^ labels: \[\]$$| labels: ${RUNNER_LABELS}|" config.yml ;
|
||||
sed -i -e "s|^ envs:$$| envs:\n DOCKER_HOST: tcp://docker:2376\n DOCKER_TLS_VERIFY: 1\n DOCKER_CERT_PATH: /certs/client|" config.yml ;
|
||||
sed -i -e "s|^ options:| options: -v /certs/client:/certs/client|" config.yml ;
|
||||
sed -i -e "s| valid_volumes: \[\]$$| valid_volumes:\n - /certs/client|" config.yml ;
|
||||
chown -R 1000:1000 /data
|
||||
'
|
||||
|
||||
runner-daemon:
|
||||
image: code.forgejo.org/forgejo/runner:4.0.1
|
||||
links:
|
||||
- docker-in-docker
|
||||
- server
|
||||
environment:
|
||||
DOCKER_HOST: tcp://docker:2376
|
||||
DOCKER_CERT_PATH: /certs/client
|
||||
DOCKER_TLS_VERIFY: "1"
|
||||
volumes:
|
||||
- ./data/runner-data:/data
|
||||
- ./data/docker_certs:/certs
|
||||
command: >-
|
||||
bash -c '
|
||||
while : ; do test -w .runner && forgejo-runner --config config.yml daemon ; sleep 1 ; done
|
||||
'
|
||||
|
||||
docker-in-docker:
|
||||
image: docker:dind
|
||||
hostname: docker # Must set hostname as TLS certificates are only valid for docker or localhost
|
||||
privileged: true
|
||||
environment:
|
||||
DOCKER_TLS_CERTDIR: /certs
|
||||
DOCKER_HOST: docker-in-docker
|
||||
volumes:
|
||||
- ./data/docker_certs:/certs
|
||||
|
|
@ -1,22 +0,0 @@
|
|||
{
|
||||
"TCP": {
|
||||
"22": {
|
||||
"TCPForward": "server:22"
|
||||
},
|
||||
"443": {
|
||||
"HTTPS": true
|
||||
}
|
||||
},
|
||||
"Web": {
|
||||
"${TS_CERT_DOMAIN}:443": {
|
||||
"Handlers": {
|
||||
"/": {
|
||||
"Proxy": "http://server:3000"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"AllowFunnel": {
|
||||
"${TS_CERT_DOMAIN}:443": false
|
||||
}
|
||||
}
|
||||
|
|
@ -1,13 +0,0 @@
|
|||
# Token used to authentication with CloudFlare Tunnel
|
||||
TUNNEL_TOKEN= ##REQUIRED##
|
||||
|
||||
# Password used for MySQL root account
|
||||
MYSQL_PASSWORD= ##REQUIRED##
|
||||
|
||||
# Base URL for the Blog
|
||||
URL=https://www.yourname.com
|
||||
|
||||
# From credentials use for transactional emails through Mailgun
|
||||
# Note: that bulk emails need a separate configuration with Mailgun API Key
|
||||
MAILGUN_USERNAME=ghost@mg.yourname.com
|
||||
MAILGUN_PASSWORD= ##REQUIRED##
|
||||
|
|
@ -1,15 +0,0 @@
|
|||
# Ghost Blog behind Cloudflare
|
||||
|
||||
This example is covered in a fair bit of detail in this blog post:
|
||||
https://www.straybits.ca/2024/ghost-cloudflare-setup/
|
||||
|
||||
Requires:
|
||||
* Cloudflare Tunnel
|
||||
* Mailgun for SMTP and bulk (Newsletter) delivery
|
||||
|
||||
Steps:
|
||||
|
||||
1. Setup your Tunnel (pointing to `http://ghost`)
|
||||
2. Update parameters in `.env`
|
||||
3. `docker compose up -d`
|
||||
4. Head to Starbucks and get your blog on!
|
||||
|
|
@ -1,47 +0,0 @@
|
|||
services:
|
||||
|
||||
tunnel:
|
||||
image: cloudflare/cloudflared
|
||||
command: tunnel --no-autoupdate run
|
||||
restart: always
|
||||
environment:
|
||||
TUNNEL_TOKEN: ${TUNNEL_TOKEN}
|
||||
depends_on:
|
||||
- ghost
|
||||
- caddy
|
||||
|
||||
caddy:
|
||||
image: caddy:alpine
|
||||
volumes:
|
||||
- ./static:/usr/share/caddy/static
|
||||
restart: always
|
||||
|
||||
ghost:
|
||||
image: ghost:5-alpine
|
||||
restart: always
|
||||
depends_on:
|
||||
- db
|
||||
environment:
|
||||
# see https://ghost.org/docs/config/#configuration-options
|
||||
database__client: mysql
|
||||
database__connection__host: db
|
||||
database__connection__user: root
|
||||
database__connection__password: ${MYSQL_PASSWORD}
|
||||
database__connection__database: ghost
|
||||
mail__transport: SMTP
|
||||
mail__options__service: Mailgun
|
||||
mail__from: ${MAILGUN_USERNAME}
|
||||
mail__options__auth__user: ${MAILGUN_USERNAME}
|
||||
mail__options__auth__pass: ${MAILGUN_PASSWORD}
|
||||
url: ${URL}
|
||||
server__port: 80
|
||||
volumes:
|
||||
- ./data/ghost:/var/lib/ghost/content
|
||||
|
||||
db:
|
||||
image: mysql:8.0
|
||||
restart: always
|
||||
environment:
|
||||
MYSQL_ROOT_PASSWORD: ${MYSQL_PASSWORD}
|
||||
volumes:
|
||||
- ./data/db:/var/lib/mysql
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
HOSTNAME=mail.yourdomain.com
|
||||
|
||||
# Relay outbound mail through Amazon SES
|
||||
RELAY_HOST=email-smtp.us-west-2.amazonaws.com
|
||||
RELAY_PORT=2587
|
||||
RELAY_USER=
|
||||
RELAY_PASSWORD=
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
{
|
||||
email admin@yourdomain.com
|
||||
}
|
||||
|
||||
mail.yourdomain.com {
|
||||
reverse_proxy * http://roundcube:80
|
||||
}
|
||||
|
|
@ -1,36 +0,0 @@
|
|||
|
||||
# Mailserver Setup
|
||||
|
||||
This docker container fires up a copy of docker-mailserver.
|
||||
* The services SMTP, IMAP, POP, etc are exposed to by tunneling traffic from a public facing VPS
|
||||
* Outbound mail is sent through Amazon SES
|
||||
* Optionally, inbound mail can be received through Amazon SES (via. S3 bucket) to allow it to be backup/primary MX if you need it.
|
||||
* Make sure to update bucket information in `s3-ingest.py`
|
||||
|
||||
Steps:
|
||||
1. You'll need to update parameters in `.env` and `wireguard.conf` and `Caddyfile`
|
||||
2. Initially, comment out (from `docker-compose.yml` the two lines starting with ` - ./data/caddy/certificates`). We need to start it once without so that Caddy will fetch our certificates. Once that happens, uncomment those lines and restart.
|
||||
3. Setup Mailgun or SES for mail forwarding and enter relay config in `.env`. SES is pretty easy to work with and supports multiple sending domains with a single set of credentials.
|
||||
4. Optionally, setup a S3 bucket and configure SES to deliver inbound mail there and then update `s3-ingest.py` and uncomment the lines for mail ingestion from `docker-compose.yml`. This is handy if your VPS/ISP is blocking inbound mail ports.
|
||||
|
||||
## Front-end Server Wireguard
|
||||
|
||||
This wireguard configuration would be deployed to the public-facing VPS which will forward interesting traffic (25,465,587,993,995,80,443) through to our docker services.
|
||||
|
||||
```
|
||||
[Interface]
|
||||
Address = 10.0.0.1/24 # Private IP for the VPS in the VPN network
|
||||
ListenPort = 51820 # Default WireGuard port
|
||||
PrivateKey = ##PRIVATE KEY FOR PUBLIC SERVER##
|
||||
|
||||
# packet forwarding
|
||||
PreUp = sysctl -w net.ipv4.ip_forward=1
|
||||
|
||||
# port forwarding (HTTP) // repeat for each port
|
||||
PreUp = iptables -t nat -A PREROUTING -i eth0 -p tcp -m multiport --dports 25,465,587,993,995,80,443 -j DNAT --to-destination 10.0.0.2
|
||||
PostDown = iptables -t nat -D PREROUTING -i eth0 -p tcp -m multiport --dports 25,465,587,993,995,80,443 -j DNAT --to-destination 10.0.0.2
|
||||
|
||||
[Peer]
|
||||
PublicKey = ##PUBLIC KEY FOR PRIVATE SERVER##
|
||||
AllowedIPs = 10.0.0.2/32 # IP of the home server in VPN
|
||||
```
|
||||
|
|
@ -1,8 +0,0 @@
|
|||
# Adding `MAILTO=""` prevents cron emailing notifications of the task outcome each run
|
||||
MAILTO=""
|
||||
#
|
||||
# m h dom mon dow user command
|
||||
#
|
||||
# Everyday 4:00AM, optimize index files
|
||||
0 4 * * * root doveadm fts optimize -A
|
||||
# EOF
|
||||
|
|
@ -1,6 +0,0 @@
|
|||
# Adding `MAILTO=""` prevents cron emailing notifications of the task outcome each run
|
||||
MAILTO=""
|
||||
#
|
||||
# m h dom mon dow user command
|
||||
* * * * * root /usr/local/bin/s3-ingest >> /var/log/mail/s3-ingest.log 2>&1
|
||||
# EOF
|
||||
|
|
@ -1,86 +0,0 @@
|
|||
services:
|
||||
|
||||
wireguard:
|
||||
image: lscr.io/linuxserver/wireguard:latest
|
||||
hostname: ${HOSTNAME}
|
||||
cap_add:
|
||||
- NET_ADMIN
|
||||
environment:
|
||||
- TZ=America/Edmonton
|
||||
volumes:
|
||||
- ./wireguard.conf:/config/wg_confs/wg0.conf
|
||||
restart: always
|
||||
sysctls:
|
||||
- net.ipv4.ip_forward=1
|
||||
|
||||
|
||||
mailserver:
|
||||
image: ghcr.io/docker-mailserver/docker-mailserver:latest
|
||||
network_mode: service:wireguard
|
||||
volumes:
|
||||
- ./data/dms/mail-data/:/var/mail/
|
||||
- ./data/dms/mail-state/:/var/mail-state/
|
||||
- ./data/dms/mail-logs/:/var/log/mail/
|
||||
- ./data/dms/config/:/tmp/docker-mailserver/
|
||||
- /etc/localtime:/etc/localtime:ro
|
||||
|
||||
# Enable ingestion from S3
|
||||
#- ./s3-ingest.py:/usr/local/bin/s3-ingest:ro
|
||||
#- ./cron/s3:/etc/cron.d/s3:ro
|
||||
|
||||
# Enable full text searching
|
||||
# https://docker-mailserver.github.io/docker-mailserver/latest/config/advanced/full-text-search/
|
||||
- ./fts-xapian-plugin.conf:/etc/dovecot/conf.d/10-plugin.conf:ro
|
||||
- ./cron/fts_xapian:/etc/cron.d/fts_xapian:ro
|
||||
|
||||
# when initializing, these need to be commented out because they don't exist.
|
||||
# until Caddy has had a chance to fetch them.
|
||||
- ./data/caddy/certificates/acme.zerossl.com-v2-dv90/${HOSTNAME}/${HOSTNAME}.crt:/etc/letsencrypt/live/${HOSTNAME}/fullchain.pem:ro
|
||||
- ./data/caddy/certificates/acme.zerossl.com-v2-dv90/${HOSTNAME}/${HOSTNAME}.key:/etc/letsencrypt/live/${HOSTNAME}/privkey.pem:ro
|
||||
environment:
|
||||
- ENABLE_RSPAMD=1
|
||||
- ENABLE_OPENDMARC=0
|
||||
- ENABLE_POLICYD_SPF=0
|
||||
- ENABLE_FAIL2BAN=1
|
||||
- ENABLE_POSTGREY=1
|
||||
- ENABLE_DNSBL=1
|
||||
- ENABLE_CLAMAV=1
|
||||
- ENABLE_POP3=1
|
||||
|
||||
# We'll leverage certs from Caddy here
|
||||
- SSL_TYPE=letsencrypt
|
||||
|
||||
# Assume we can't send outbound mail. Relay sent mail through
|
||||
# something like Mailgun or Amazon SES
|
||||
- RELAY_HOST=${RELAY_HOST}
|
||||
- RELAY_PORT=${RELAY_PORT}
|
||||
- RELAY_USER=${RELAY_USER}
|
||||
- RELAY_PASSWORD=${RELAY_PASSWORD}
|
||||
cap_add:
|
||||
- NET_ADMIN # For Fail2Ban to work
|
||||
restart: always
|
||||
|
||||
# ========= WEBMAIL =========================================
|
||||
# Who doesn't want webmail. Besides we can piggy back on this
|
||||
# to fetch TLS certificates for our IMAP/SMTP services.
|
||||
|
||||
caddy:
|
||||
image: caddy:latest
|
||||
restart: always
|
||||
network_mode: service:wireguard
|
||||
volumes:
|
||||
- ./Caddyfile:/etc/caddy/Caddyfile # Mount Caddyfile for configuration
|
||||
- ./data/caddy:/data/caddy # Persistent storage for certificates
|
||||
|
||||
roundcube:
|
||||
image: roundcube/roundcubemail:latest
|
||||
container_name: roundcubemail
|
||||
restart: always
|
||||
volumes:
|
||||
- ./data/roundcube/www:/var/www/html
|
||||
- ./data/roundcube/db:/var/roundcube/db
|
||||
environment:
|
||||
- ROUNDCUBEMAIL_DB_TYPE=sqlite
|
||||
- ROUNDCUBEMAIL_SKIN=elastic
|
||||
- ROUNDCUBEMAIL_DEFAULT_HOST=tls://${HOSTNAME}
|
||||
- ROUNDCUBEMAIL_SMTP_SERVER=tls://${HOSTNAME}
|
||||
|
|
@ -1,28 +0,0 @@
|
|||
mail_plugins = $mail_plugins fts fts_xapian
|
||||
|
||||
plugin {
|
||||
fts = xapian
|
||||
fts_xapian = partial=3 full=20 verbose=0
|
||||
|
||||
fts_autoindex = yes
|
||||
fts_enforced = yes
|
||||
|
||||
# disable indexing of folders
|
||||
fts_autoindex_exclude = \Trash
|
||||
|
||||
# Index attachements
|
||||
# fts_decoder = decode2text
|
||||
}
|
||||
|
||||
service indexer-worker {
|
||||
# limit size of indexer-worker RAM usage, ex: 512MB, 1GB, 2GB
|
||||
vsz_limit = 1GB
|
||||
}
|
||||
|
||||
# service decode2text {
|
||||
# executable = script /usr/libexec/dovecot/decode2text.sh
|
||||
# user = dovecot
|
||||
# unix_listener decode2text {
|
||||
# mode = 0666
|
||||
# }
|
||||
# }
|
||||
|
|
@ -1,149 +0,0 @@
|
|||
#!/bin/env python3
|
||||
|
||||
import os
|
||||
import datetime
|
||||
import hashlib
|
||||
import hmac
|
||||
import http.client
|
||||
import urllib.parse
|
||||
import logging
|
||||
import subprocess
|
||||
import xml.etree.ElementTree as ET
|
||||
|
||||
# AWS S3 configuration
|
||||
# Would rather these be in environment variables, but CRON doesn't have this.
|
||||
bucket_name = "MYMAILBUCKET"
|
||||
prefix = ""
|
||||
region = 'us-west-2'
|
||||
access_key = ""
|
||||
secret_key = ""
|
||||
|
||||
# Logging configuration
|
||||
logging.basicConfig(
|
||||
level=logging.INFO,
|
||||
format='%(asctime)s - %(levelname)s - %(message)s',
|
||||
datefmt='%Y-%m-%d %H:%M:%S')
|
||||
|
||||
def sign(key, msg):
|
||||
return hmac.new(key, msg.encode('utf-8'), hashlib.sha256).digest()
|
||||
|
||||
def get_signature_key(key, date_stamp, region_name, service_name):
|
||||
k_date = sign(('AWS4' + key).encode('utf-8'), date_stamp)
|
||||
k_region = sign(k_date, region_name)
|
||||
k_service = sign(k_region, service_name)
|
||||
k_signing = sign(k_service, 'aws4_request')
|
||||
return k_signing
|
||||
|
||||
def create_signed_headers(method, host, uri, params, body=''):
|
||||
t = datetime.datetime.utcnow()
|
||||
amz_date = t.strftime('%Y%m%dT%H%M%SZ')
|
||||
date_stamp = t.strftime('%Y%m%d')
|
||||
|
||||
canonical_uri = uri
|
||||
canonical_querystring = '&'.join([f"{urllib.parse.quote_plus(k)}={urllib.parse.quote_plus(v)}" for k, v in params.items()])
|
||||
payload_hash = hashlib.sha256(body.encode('utf-8')).hexdigest() if body else hashlib.sha256(b'').hexdigest()
|
||||
|
||||
# Include x-amz-date and x-amz-content-sha256 in canonical headers and signed headers
|
||||
canonical_headers = f'host:{host}\n' \
|
||||
f'x-amz-content-sha256:{payload_hash}\n' \
|
||||
f'x-amz-date:{amz_date}\n'
|
||||
signed_headers = 'host;x-amz-content-sha256;x-amz-date'
|
||||
|
||||
canonical_request = f"{method}\n{canonical_uri}\n{canonical_querystring}\n{canonical_headers}\n{signed_headers}\n{payload_hash}"
|
||||
algorithm = 'AWS4-HMAC-SHA256'
|
||||
credential_scope = f'{date_stamp}/{region}/s3/aws4_request'
|
||||
string_to_sign = f'{algorithm}\n{amz_date}\n{credential_scope}\n{hashlib.sha256(canonical_request.encode("utf-8")).hexdigest()}'
|
||||
|
||||
signing_key = get_signature_key(secret_key, date_stamp, region, 's3')
|
||||
signature = hmac.new(signing_key, string_to_sign.encode('utf-8'), hashlib.sha256).hexdigest()
|
||||
|
||||
authorization_header = (
|
||||
f"{algorithm} Credential={access_key}/{credential_scope}, "
|
||||
f"SignedHeaders={signed_headers}, Signature={signature}"
|
||||
)
|
||||
|
||||
headers = {
|
||||
'x-amz-date': amz_date,
|
||||
'x-amz-content-sha256': payload_hash,
|
||||
'Authorization': authorization_header
|
||||
}
|
||||
return headers
|
||||
|
||||
def make_request(method, uri, params=None, headers=None):
|
||||
host = f's3.{region}.amazonaws.com'
|
||||
conn = http.client.HTTPSConnection(host)
|
||||
|
||||
if params:
|
||||
query_string = urllib.parse.urlencode(params)
|
||||
full_uri = f"{uri}?{query_string}"
|
||||
else:
|
||||
full_uri = uri
|
||||
|
||||
conn.request(method, full_uri, headers=headers)
|
||||
response = conn.getresponse()
|
||||
data = response.read()
|
||||
conn.close()
|
||||
|
||||
return response.status, data
|
||||
|
||||
def list_objects():
|
||||
uri = f'/{bucket_name}'
|
||||
params = {'list-type': '2', 'prefix': prefix}
|
||||
headers = create_signed_headers('GET', f's3.{region}.amazonaws.com', uri, params)
|
||||
|
||||
status, response = make_request('GET', uri, params, headers)
|
||||
if status == 200:
|
||||
return response
|
||||
else:
|
||||
logging.error(f"Error listing objects: {response}")
|
||||
return None
|
||||
|
||||
def download_object(key):
|
||||
uri = f'/{bucket_name}/{urllib.parse.quote_plus(key)}'
|
||||
headers = create_signed_headers('GET', f's3.{region}.amazonaws.com', uri, {})
|
||||
|
||||
status, response = make_request('GET', uri, headers=headers)
|
||||
if status == 200:
|
||||
return response
|
||||
else:
|
||||
logging.error(f"Error downloading {key}: {response}")
|
||||
return None
|
||||
|
||||
def delete_object(key):
|
||||
uri = f'/{bucket_name}/{urllib.parse.quote_plus(key)}'
|
||||
headers = create_signed_headers('DELETE', f's3.{region}.amazonaws.com', uri, {})
|
||||
|
||||
status, response = make_request('DELETE', uri, headers=headers)
|
||||
if status == 204:
|
||||
logging.info(f"Deleted {key} from S3")
|
||||
else:
|
||||
logging.error(f"Error deleting {key}: {response}")
|
||||
|
||||
def inject_email(email_content):
|
||||
process = subprocess.Popen(['/usr/sbin/sendmail', '-t'], stdin=subprocess.PIPE)
|
||||
process.communicate(input=email_content)
|
||||
if process.returncode == 0:
|
||||
logging.info("Email successfully injected into Postfix")
|
||||
else:
|
||||
logging.error("Failed to inject email into Postfix")
|
||||
|
||||
def main():
|
||||
# List all objects with the specified prefix
|
||||
xml_content = list_objects()
|
||||
if xml_content:
|
||||
root = ET.fromstring(xml_content)
|
||||
namespace = {'ns': root.tag.split('}')[0].strip('{')} # Extracts namespace from the root tag
|
||||
|
||||
for contents in root.findall('.//ns:Contents', namespace):
|
||||
key = contents.find('ns:Key', namespace).text
|
||||
logging.info(f"Processing {key}")
|
||||
email_content = download_object(key)
|
||||
if email_content:
|
||||
inject_email(email_content)
|
||||
delete_object(key)
|
||||
|
||||
def extract_keys_from_xml(xml_content):
|
||||
return [elem.text for elem in root.iter('Key')]
|
||||
|
||||
if __name__ == '__main__':
|
||||
main()
|
||||
|
|
@ -1,13 +0,0 @@
|
|||
[Interface]
|
||||
Address = 10.0.0.2/24 # Private IP for the home server in the VPN network
|
||||
PrivateKey = ##PRIVATE KEY FOR PRIVATE SERVER##
|
||||
Table = 123
|
||||
|
||||
PreUp = ip rule add from 10.0.0.2 table 123 priority 1
|
||||
PostDown = ip rule del from 10.0.0.2 table 123 priority 1
|
||||
|
||||
[Peer]
|
||||
PublicKey = ##PUBLIC_KEY_FOR_PUBLIC_SERVER##
|
||||
AllowedIPs = 0.0.0.0/0
|
||||
Endpoint = ##PUBLIC_SERVER_IP##:51820
|
||||
PersistentKeepalive = 25
|
||||
|
|
@ -1,2 +0,0 @@
|
|||
# Cloudflare Tunnel Token
|
||||
TUNNEL_TOKEN= ##REQUIRED##
|
||||
|
|
@ -1,15 +0,0 @@
|
|||
# PrivateBin and Cloudflare
|
||||
|
||||
I use PrivateBin ALL THE TIME to share temporary code snippets, etc.
|
||||
|
||||
Very little setup required.
|
||||
|
||||
Requires:
|
||||
* Cloudflare Tunnel
|
||||
|
||||
Steps:
|
||||
|
||||
1. Setup your Tunnel (pointing to `http://privatebin:8080`)
|
||||
2. Set Cloudflare Tunnel token in `.env`
|
||||
3. Fine-tune settings in `conf.php`
|
||||
4. `docker compose up -d`
|
||||
|
|
@ -1,196 +0,0 @@
|
|||
;<?php http_response_code(403); /*
|
||||
; config file for PrivateBin
|
||||
;
|
||||
; An explanation of each setting can be find online at https://github.com/PrivateBin/PrivateBin/wiki/Configuration.
|
||||
|
||||
[main]
|
||||
; (optional) set a project name to be displayed on the website
|
||||
name = "My Pastebin"
|
||||
|
||||
; The full URL, with the domain name and directories that point to the PrivateBin files
|
||||
; This URL is essential to allow Opengraph images to be displayed on social networks
|
||||
; basepath = ""
|
||||
|
||||
; enable or disable the discussion feature, defaults to true
|
||||
discussion = true
|
||||
|
||||
; preselect the discussion feature, defaults to false
|
||||
opendiscussion = false
|
||||
|
||||
; enable or disable the password feature, defaults to true
|
||||
password = true
|
||||
|
||||
; enable or disable the file upload feature, defaults to false
|
||||
fileupload = false
|
||||
|
||||
; preselect the burn-after-reading feature, defaults to false
|
||||
burnafterreadingselected = false
|
||||
|
||||
; which display mode to preselect by default, defaults to "plaintext"
|
||||
; make sure the value exists in [formatter_options]
|
||||
defaultformatter = "plaintext"
|
||||
|
||||
; (optional) set a syntax highlighting theme, as found in css/prettify/
|
||||
; syntaxhighlightingtheme = "sons-of-obsidian"
|
||||
|
||||
; size limit per paste or comment in bytes, defaults to 10 Mebibytes
|
||||
sizelimit = 10485760
|
||||
|
||||
; template to include, default is "bootstrap" (tpl/bootstrap.php)
|
||||
template = "bootstrap"
|
||||
|
||||
; (optional) info text to display
|
||||
; use single, instead of double quotes for HTML attributes
|
||||
;info = "More information on the <a href='https://privatebin.info/'>project page</a>."
|
||||
|
||||
; (optional) notice to display
|
||||
; notice = "Note: This is a test service: Data may be deleted anytime. Kittens will die if you abuse this service."
|
||||
|
||||
; by default PrivateBin will guess the visitors language based on the browsers
|
||||
; settings. Optionally you can enable the language selection menu, which uses
|
||||
; a session cookie to store the choice until the browser is closed.
|
||||
languageselection = false
|
||||
|
||||
; set the language your installs defaults to, defaults to English
|
||||
; if this is set and language selection is disabled, this will be the only language
|
||||
; languagedefault = "en"
|
||||
|
||||
; (optional) URL shortener address to offer after a new paste is created
|
||||
; it is suggested to only use this with self-hosted shorteners as this will leak
|
||||
; the pastes encryption key
|
||||
; urlshortener = "https://shortener.example.com/api?link="
|
||||
|
||||
; (optional) Let users create a QR code for sharing the paste URL with one click.
|
||||
; It works both when a new paste is created and when you view a paste.
|
||||
; qrcode = true
|
||||
|
||||
; (optional) IP based icons are a weak mechanism to detect if a comment was from
|
||||
; a different user when the same username was used in a comment. It might be
|
||||
; used to get the IP of a non anonymous comment poster if the server salt is
|
||||
; leaked and a SHA256 HMAC rainbow table is generated for all (relevant) IPs.
|
||||
; Can be set to one these values: "none" / "vizhash" / "identicon" (default).
|
||||
; icon = "none"
|
||||
|
||||
; Content Security Policy headers allow a website to restrict what sources are
|
||||
; allowed to be accessed in its context. You need to change this if you added
|
||||
; custom scripts from third-party domains to your templates, e.g. tracking
|
||||
; scripts or run your site behind certain DDoS-protection services.
|
||||
; Check the documentation at https://content-security-policy.com/
|
||||
; Notes:
|
||||
; - If you use a bootstrap theme, you can remove the allow-popups from the
|
||||
; sandbox restrictions.
|
||||
; - By default this disallows to load images from third-party servers, e.g. when
|
||||
; they are embedded in pastes. If you wish to allow that, you can adjust the
|
||||
; policy here. See https://github.com/PrivateBin/PrivateBin/wiki/FAQ#why-does-not-it-load-embedded-images
|
||||
; for details.
|
||||
; - The 'unsafe-eval' is used in two cases; to check if the browser supports
|
||||
; async functions and display an error if not and for Chrome to enable
|
||||
; webassembly support (used for zlib compression). You can remove it if Chrome
|
||||
; doesn't need to be supported and old browsers don't need to be warned.
|
||||
; cspheader = "default-src 'none'; base-uri 'self'; form-action 'none'; manifest-src 'self'; connect-src * blob:; script-src 'self' 'unsafe-eval'; style-src 'self'; font-src 'self'; frame-ancestors 'none'; img-src 'self' data: blob:; media-src blob:; object-src blob:; sandbox allow-same-origin allow-scripts allow-forms allow-popups allow-modals allow-downloads"
|
||||
|
||||
; stay compatible with PrivateBin Alpha 0.19, less secure
|
||||
; if enabled will use base64.js version 1.7 instead of 2.1.9 and sha1 instead of
|
||||
; sha256 in HMAC for the deletion token
|
||||
; zerobincompatibility = false
|
||||
|
||||
; Enable or disable the warning message when the site is served over an insecure
|
||||
; connection (insecure HTTP instead of HTTPS), defaults to true.
|
||||
; Secure transport methods like Tor and I2P domains are automatically whitelisted.
|
||||
; It is **strongly discouraged** to disable this.
|
||||
; See https://github.com/PrivateBin/PrivateBin/wiki/FAQ#why-does-it-show-me-an-error-about-an-insecure-connection for more information.
|
||||
; httpwarning = true
|
||||
|
||||
; Pick compression algorithm or disable it. Only applies to pastes/comments
|
||||
; created after changing the setting.
|
||||
; Can be set to one these values: "none" / "zlib" (default).
|
||||
; compression = "zlib"
|
||||
|
||||
[expire]
|
||||
; expire value that is selected per default
|
||||
; make sure the value exists in [expire_options]
|
||||
default = "1week"
|
||||
|
||||
[expire_options]
|
||||
; Set each one of these to the number of seconds in the expiration period,
|
||||
; or 0 if it should never expire
|
||||
5min = 300
|
||||
10min = 600
|
||||
1hour = 3600
|
||||
1day = 86400
|
||||
1week = 604800
|
||||
; Well this is not *exactly* one month, it's 30 days:
|
||||
1month = 2592000
|
||||
1year = 31536000
|
||||
never = 0
|
||||
|
||||
[formatter_options]
|
||||
; Set available formatters, their order and their labels
|
||||
plaintext = "Plain Text"
|
||||
syntaxhighlighting = "Source Code"
|
||||
markdown = "Markdown"
|
||||
|
||||
[traffic]
|
||||
; time limit between calls from the same IP address in seconds
|
||||
; Set this to 0 to disable rate limiting.
|
||||
limit = 10
|
||||
|
||||
; (optional) Set IPs addresses (v4 or v6) or subnets (CIDR) which are exempted
|
||||
; from the rate-limit. Invalid IPs will be ignored. If multiple values are to
|
||||
; be exempted, the list needs to be comma separated. Leave unset to disable
|
||||
; exemptions.
|
||||
; exempted = "1.2.3.4,10.10.10/24"
|
||||
|
||||
; (optional) If you want only some source IP addresses (v4 or v6) or subnets
|
||||
; (CIDR) to be allowed to create pastes, set these here. Invalid IPs will be
|
||||
; ignored. If multiple values are to be exempted, the list needs to be comma
|
||||
; separated. Leave unset to allow anyone to create pastes.
|
||||
; creators = "1.2.3.4,10.10.10/24"
|
||||
|
||||
; (optional) if your website runs behind a reverse proxy or load balancer,
|
||||
; set the HTTP header containing the visitors IP address, i.e. X_FORWARDED_FOR
|
||||
; header = "X_FORWARDED_FOR"
|
||||
|
||||
[purge]
|
||||
; minimum time limit between two purgings of expired pastes, it is only
|
||||
; triggered when pastes are created
|
||||
; Set this to 0 to run a purge every time a paste is created.
|
||||
limit = 300
|
||||
|
||||
; maximum amount of expired pastes to delete in one purge
|
||||
; Set this to 0 to disable purging. Set it higher, if you are running a large
|
||||
; site
|
||||
batchsize = 10
|
||||
|
||||
[model]
|
||||
; name of data model class to load and directory for storage
|
||||
; the default model "Filesystem" stores everything in the filesystem
|
||||
class = Filesystem
|
||||
[model_options]
|
||||
dir = PATH "data"
|
||||
|
||||
;[model]
|
||||
; example of a Google Cloud Storage configuration
|
||||
;class = GoogleCloudStorage
|
||||
;[model_options]
|
||||
;bucket = "my-private-bin"
|
||||
;prefix = "pastes"
|
||||
|
||||
;[model]
|
||||
; example of DB configuration for MySQL
|
||||
;class = Database
|
||||
;[model_options]
|
||||
;dsn = "mysql:host=localhost;dbname=privatebin;charset=UTF8"
|
||||
;tbl = "privatebin_" ; table prefix
|
||||
;usr = "privatebin"
|
||||
;pwd = "Z3r0P4ss"
|
||||
;opt[12] = true ; PDO::ATTR_PERSISTENT
|
||||
|
||||
;[model]
|
||||
; example of DB configuration for SQLite
|
||||
;class = Database
|
||||
;[model_options]
|
||||
;dsn = "sqlite:" PATH "data/db.sq3"
|
||||
;usr = null
|
||||
;pwd = null
|
||||
;opt[12] = true ; PDO::ATTR_PERSISTENT
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
version: "3.7"
|
||||
|
||||
services:
|
||||
|
||||
tunnel:
|
||||
image: cloudflare/cloudflared
|
||||
command: tunnel --no-autoupdate run
|
||||
restart: unless-stopped
|
||||
env_file: .env
|
||||
|
||||
privatebin:
|
||||
image: privatebin/fs
|
||||
restart: always
|
||||
volumes:
|
||||
- ./data:/srv/data
|
||||
- ./conf.php:/srv/cfg/conf.php:ro
|
||||
|
||||
Loading…
Reference in a new issue